Filter
Top Products
Digital Monitoring Products XR2500F Installation Guide
14
InstallatIon
10.3 Accessory Devices
Interface Adaptor and Interface Cards
461 Interface Adaptor Card Allows you to connect two or more expansion interface cards to the XR2500F panel. The 461 is an
expansion board that plugs into the panel J6 Interface Connector and is required when using two or more
Interface Cards. Use combinations of Interface Cards for expanding zones, network interfacing, and local
printing.
462N Network Interface Card Allows you to connect the XR2500F to any compatible data network and use its communication capability
in place of standard dial out telephone lines. The 462N also provides an LX-Bus™ for connecting zone and
output expansion modules to the panel.
462P Printer Interface Card Allows you to connect the XR2500F to any compatible serial printer providing the user with real-time event
recording. The 462P also provides an LX-Bus™ for connecting zone and output expansion modules.
463G Digital Cellular Communicator
Card
Allows you to connect the XR2500F to any compatible GPRS/SMS network and use its communication in
place of standard dial out lines. The 463G also provides and LX-Bus™ for connecting zone and output
expansion modules to the panel.
481 Expansion Interface Card Provides one LX-Bus for connecting up to 100 zone and output expansion modules.
Zone and Output Expansion Modules
710/710F Bus Splitter/Repeater Allows you to increase keypad or LX-Bus™ wiring distance to 2500 feet. Model 710F is for 24 VDC
applications.
711 Single Point Zone Expanders Provides one Class B zone for connecting devices.
714, 714-8, 714-16 Zone Expanders Provides Class B zones for connecting non-powered re devices.
715, 715-8, 715-16 Zone Expanders Provides 12 VDC Class B powered zones for connecting smoke detectors, glassbreak detectors, and other
2- or 4-wire devices.
725 Zone Expanders Provides 24 VDC Class B powered zones for connecting smoke detectors, glassbreak detectors, and other 2-
or 4-wire devices. Requires 710F Bus Splitter/Repeater.
716 Output Expander Provides four Form C relays (SPDT) and four switched grounds (open collector) for use in a variety of
remote annunciation and control applications.
717 Graphic Annunciator Module Provides 20 zone following annunciator outputs (open collector) for use in a variety of remote annunciation
and control applications for use on the keypad bus only.
733, 734 Wiegand Interface Cards Provides system codeless entry, and arming and disarming using access control readers.
Indicating and Initiating Devices
865 Supervised Style W or X
Notication Circuit Module
Provides supervised alarm current when using the XR2500F panel bell output and up to 5 Amps at 12 or 24
VDC when using a listed auxiliary power supply. The 865 can supervise 2-wire or 4-wire style circuits for
opens and shorts with individual LED annunciation.
866 Style W Notication Circuit
Module
Provides supervised alarm current using the XR2500F panel bell output and up to 5 Amps at 12 or 24 VDC
when using a listed auxiliary power supply. The 866 can supervise 2-wire Style W circuits for opens and
shorts.
867 Style W LX-Bus Notication
Circuit Module
Provides supervised alarm current using the XR2500F panel bell output and up to 5 Amps at 12 or 24 VDC
when using a listed auxiliary power supply. The 867 connects to the XR2500F panel LX-Bus™ and provides
one 2-wire Style W notication circuit for open and short conditions. Individual Bell Relay addresses Bell
Ring styles.
869 Dual Class A Style D Initiating
Module
Provides two Class A, Style D, 4-wire initiating zones for connecting waterow switches and other
non-powered re and burglary devices.
Accessory Modules and Keypads
893A Dual Phone Line Module Allows you to supervise two standard phone lines connected to an XR2500F panel. The 893A module
monitors the main and backup phone lines for a sustained voltage drop and alerts users when the phone
line is bad.
* ePAD™ Virtual Keypads Allows users to control the security system from any computer in the world using the Internet.
LCD keypads Allows you to control the panel from various remote locations. Connect up to sixteen supervised Model
630F Remote Fire Command Center, Model 690, 790, 693/793 Security Command™ keypads, 7060, 7063,
7070, 7073, 7160, 7163, 7170, 7173 Thinline™ keypads, 7060A, 7063A, 7070A, 7073A Aqualite™ keypads,
or 7760 Clear Touch™ keypad to the keypad bus using terminals 7, 8, 9, and 10.
Addressable Smoke Detectors
521LX, 521LXT Single-zone, addressable module conventional smoke/smoke heat detectors that connect to the LX-Bus.
Includes remote maintenance reporting, drift compensation, and multi-criteria detection.
* These devices have not been investigated and shall not be used in listed installations.
Table 5: Accessory Devices