Filter
Top Products
iLux
™
Integrated Lighting System w/infiNET
™
Crestron CLS-C6RF
designed for 120 VAC 50/60 Hz installations; the CLSI-C6RF and CLSI-C6MRF are
designed for 230 VAC 50/60 Hz installations. The units are functionally identical,
except that the CLS/CLSI-C6MRF units include a built-in motion sensor. For
simplicity in this guide, references to the CLS-C6RF unit apply equally to all, except
where noted.
Six Channel Dimming
The CLS-C6RF features six channels of dimming for incandescent, magnetic low-
voltage, neon/cold cathode, and two-wire dimmable fluorescent loads. Each channel
can also support switching of many non-dimmable lighting loads. Each channel will
handle up to 800 watts individually, with a total rating for the complete unit of 1920
watts at 120 VAC for CLS-C6RF/C6MRF (2300 watts at 230 VAC for
CLSI-C6RF/C6MRF). Larger loads and additional load types can also be supported
using Crestron CLS-EXP Series expansion modules (sold separately).
Six Group Shade Control
Using Crestron’s networked shade and drape controllers (sold separately), the
CLS-C6RF enables versatile control of a roomful of motorized window treatments,
screens, and lifts in up to six shade groups. Each controller is connected to the
CLS-C6RF via the four-wire Cresnet
®
bus.
Versatile Front Panel Controls
The deceptively clean front panel actually affords an extensive amount of control
and customization to suit each unique room application. Large ON and OFF buttons
provide instant access to the “On” and “All Off” scenes, while the six main buttons
can be set up to recall additional scene presets, adjust shades, or perform a host of
other functions. The buttons' “rocker” action enables intuitive control for adjusting
lighting levels and shade positions. An additional “up/down” button is configurable
for a variety of functions, including use as a master lighting or shade control, or as a
“shift” button to expand the capabilities of the six main buttons.
With each new scene selection, window shades reposition and lights fade elegantly
to their new settings. The selected scene is indicated by a white LED beside each
button, and the customizable label strip allows each button to be clearly labeled
using Crestron Engraver software or standard 3/8” tape labels. Dimming levels and
shade positions are displayed graphically on six green LED bargraphs accessible
behind the flip-up front cover. Additional controls and a numeric display hidden
beneath the cover enable setup without requiring a PC. Enhanced customization is
provided via the PC programming port using iLux Designer software.
Built-in Motion Detector (CLS/CLSI-C6MRF)
The CLS/CLSI-C6MRF model features a built-in motion detector, enabling
automated control based on room occupancy. Lights can be programmed to turn on
and shades open automatically when someone enters the room, or turn off and close
when the room is left empty.
Multipoint Keypad Control
Up to 16 Crestron keypads (sold separately) may be connected to a single
CLS-C6RF, providing versatile multipoint control for rooms with several entrances
or work areas.
• iLux
™
Integrated Lighting System w/infiNET
™
: CLS-C6RF Operations Guide - DOC. 6418A
2