Filter
Top Products
iLux
™
Integrated Lighting System w/infiNET
™
Crestron CLS-C6RF
CLS-C6RF Front Panel
CLS-C6RF Rear Panel
Connectors, Controls, & Indicators
# CONNECTORS,
CONTROLS, &
INDICATORS
DESCRIPTION
1 Bargraphs In Standard mode and Lights mode, the bargraphs,
each a series of seven LEDs, indicate the current
light intensity for the six lighting loads. In Shades
mode, they indicate the shade position for each of
the shade groups. The bargraphs have other
functions in Setup mode.
2 Label Strip Customizable label for the six scenes.
3 Function Buttons and LEDs In Standard mode, these buttons are typically used
to select/recall scenes. In Lights mode, they are
used to make temporary adjustments to the six
lighting loads. In Shades mode they are used to
make temporary adjustments to the shade groups.
They can also be programmed to perform other
functions.
4 IR Detector The IR detector responds to commands from the
optional Crestron remote control. The remote
control can be used to recall Scenes 1 – 4, the On
and Off scenes, and perform master raise and lower
of the lighting loads.
(Continued on following page)
• iLux
™
Integrated Lighting System w/infiNET
™
: CLS-C6RF Operations Guide - DOC. 6418A
6