Filter
Top Products
iLux
™
Integrated Lighting System w/infiNET
™
Crestron CLS-C6RF
Function name Open Shades Momentary (All, Group 1-6)
Behavior Specified shades will move toward the Open position for as long as the
button is pressed. Movement will stop when button is released.
LED On while button is pressed
Applies To Remote Button
Rocker
Behavior
N/A
Notes Shade commands with “All” parameter will only affect all the shade
groups connected to the given CLS-C6RF module. They will not pass
from one CLS-C6RF module to the other (either when directly
connected or when linked through Cresnet system). To accomplish this
function for all shades in a multi-unit system, use SIMPL programming.
Function name Close Shades Momentary (All, Group 1-6)
Behavior Specified shades will move toward the Closed position for as long as
the button is pressed. Movement will stop when button is released.
LED On while button is pressed
Applies To Remote Button
Rocker
Behavior
N/A
Notes Shade commands with “All” parameter will only affect all the shade
groups connected to the given CLS-C6RF module. They will not pass
from one CLS-C6RF module to the other (either when directly
connected or when linked through Cresnet system). To accomplish this
function for all shades in a multi-unit system, use SIMPL programming.
Function name Jog Shades Open (All, Group 1-6)
Behavior Specified shades will move toward the Open position for the specified
jog time, and then stop.
LED On while button is pressed
Applies To Remote Button
Rocker
Behavior
N/A
Notes Jog time defaults to 0.05 sec. Other values can be set in iLux Designer.
Shade commands with “All” parameter will only affect all the shade
groups connected to the given CLS-C6RF module. They will not pass
from one CLS-C6RF module to the other (either when directly
connected or when linked through Cresnet system). To accomplish this
function for all shades in a multi-unit system, use SIMPL programming.
Function name Jog Shades Closed (All, Group 1-6)
Behavior Specified shades will move toward the Closed position for the specified
jog time, and then stop.
LED On while button is pressed
Applies To Remote Button
Rocker
Behavior
N/A
Notes Jog time defaults to 0.05 sec. Other values can be set in iLux Designer.
Shade commands with “All” parameter will only affect all the shade
groups connected to the given CLS-C6RF module. They will not pass
from one CLS-C6RF module to the other (either when directly
connected or when linked through Cresnet system). To accomplish this
function for all shades in a multi-unit system, use SIMPL programming.
• iLux
™
Integrated Lighting System w/infiNET
™
: CLS-C6RF Operations Guide - DOC. 6418A
52