Filter
Top Products
iLux
™
Integrated Lighting System w/infiNET
™
Crestron CLS-C6RF
Function name External Function (1-32)
Behavior Activates the corresponding “press” digital signal (press1 – press32 on
the External Functions slot) on the Cresnet System connected to the
CONTROL SYSTEM port. Signal will remain high for as long as the
button is pressed.
LED On when the corresponding “fb” digital signal (fb1 – fb32 on the External
Functions slot) from the control system is high.
Applies To Shifted Rocker, Remote Button
Rocker
Behavior
Left, right, and both all do the same thing
Notes Note that these should only be assigned to a CLS-C6RF unit that is
directly connected to a Cresnet control system, or to keypads connected
to that unit’s local devices network.
Function name Dual External Function (1/2 …31/32)
Behavior Activates the corresponding “press” digital signal (press1 – press32 on
the External Functions slot) on the Cresnet System connected to the
CONTROL SYSTEM port. Signal will remain high for as long as the
button is pressed.
The left button corresponds to the lower number. The right button
corresponds to the higher number.
LED On if feedback for either join number is high, off if feedback for both join
numbers is low.
Applies To Shifted Rocker
Rocker
Behavior
See “behavior” above
Notes Note that these should only be assigned to CLS-C6RF unit that is
directly connected to Cresnet control system. If assigned to unit that is
connected to the local devices network of another CLS-C6RF unit, they
will not function.
Function name Shift
Behavior If Shift function is assigned to the up/down button in iLux Designer,
pressing this button will alternate between lower and upper functions for
the six front panel function buttons
LED N/A
Applies To up/down
Rocker
Behavior
Top, bottom, and both all do the same thing
Notes N/A
• iLux
™
Integrated Lighting System w/infiNET
™
: CLS-C6RF Operations Guide - DOC. 6418A
54