Crestron electronic CLS-C6RF Indoor Furnishings User Manual


 
Crestron CLS-C6RF iLux
Integrated Lighting System w/infiNET
Appendix B: Console Commands
Console commands are available through the Crestron Toolbox program.
1. Select Text Console from the Tools menu.
2. At the prompt, enter HELP ALL and press Return. The system displays:
iLux>HELP ALL
? display list of common commands
GETCONFIG get project file from iLux
GREENLEDLEVEL display or set the green leds brightness level
HELP display list of available categories
INFO display additional device information
IR display or enable/disable IR reception
MNETID set or display MNET id
PROJECTINFO display detailed project file information
PUTCONFIG load project file to iLux
REBOOT reboot the iLux
REPORTCRESNET show all devices on the local network
RESTORE set all parameters to factory default
RFCHANNEL set or display RF Channel settings
SYSTEM load firmware to iLux
UPLOAD load firmware to cresnet device on the local
network
UPTIME Display time since reboot
VERSION display firmware version number
WHITELEDLEVEL display or set white leds brightness level
WHITELEDGLOWLEVEL display or set white leds glow brightness
level
iLux>
The commands are presented alphabetically in the following listing. Details about
each command include a description of the command, a list of help menus that
contain the command, the proper syntax for entering the command, and definitions
of parameters that may be included in the syntax. Note that the console commands
are case insensitive.
?
Description: This command produces a list of the most used common commands.
Help Menu(s): Main, Common
Syntax: ?
Parameters: None
MNETID
Description: Use this command to set or display the Cresnet ID of the CLS-C6RF as a slave device.
Help Menu(s): System, Common
Syntax: MNETID <ID>
MNETID
Parameters: <03…20> to set the ID
none to display the current ID
GETCONFIG
Description: Use this command to get project file information from the CLS-C6RF.
Help Menu(s): File
Syntax: GETCONFIG PROJECT
Parameters: PROJECT to get the project file from iLux
Operations Guide - DOC. 6418A iLux
Integrated Lighting System w/infiNET
: CLS-C6RF 43