Filter
Top Products
46
Position front panel at approximately 30°
angle, hook front ange under clips on outer top
corner panels as shown in Figure 30a, Detail A, Step
1. Lower rear of panel into position between outer
Boiler
Size
Order of Assembly
Front f Block Assembly g Rear
4 Section 22-1/4” Front Top Panel 11-3/8” Rear Top Panel
5 Section 29” Front Top Panel 11-3/8” Rear Top Panel
6 Section 35¾” Front Top Panel 11-3/8” Rear Top Panel
7 Section 22-1/4” Front Top Panel 20-1/4” Intermediate Top Panel 11-3/8” Rear Top Panel
8 Section 22-1/4” Front Top Panel 27” Intermediate Top Panel 11-3/8” Rear Top Panel
9 Section 29” Front Top Panel 27” Intermediate Top Panel 11-3/8” Rear Top Panel
10 Section 29” Front Top Panel 33-3/4” Intermediate Top Panel 11-3/8” Rear Top Panel
11 Section 35-3/4” Front Top Panel 33-3/4” Intermediate Top Panel 11-3/8” Rear Top Panel
12 Section 29” Front Top Panel 27” Intermediate Top Panel 20-1/4” Intermediate Top Panel 11-3/8” Rear Top Panel
13 Section 29” Front Top Panel 27” Intermediate Top Panel 27” Intermediate Top Panel 11-3/8” Rear Top Panel
14 Section 35-3/4” Front Top Panel 27” Intermediate Top Panel 27” Intermediate Top Panel 11-3/8” Rear Top Panel
15 Section 29” Front Top Panel 33-3/4” Intermediate Top Panel 33-3/4” Intermediate Top Panel 11-3/8” Rear Top Panel
16 Section 35-3/4” Front Top Panel 33-3/4” Intermediate Top Panel 33-3/4” Intermediate Top Panel 11-3/8” Rear Top Panel
17 Section 29” Front Top Panel
27” Intermediate
Top Panel
27” Intermediate
Top Panel
27” Intermediate
Top Panel
11-3/8” Rear
Top Panel
18 Section
35-3/4” Front
Top Panel
27” Intermediate
Top Panel
27” Intermediate
Top Panel
27” Intermediate
Top Panel
11-3/8” Rear
Top Panel
Table XI: Jacket Top Panel Arrangement
Figure 30a: Installing Jacket Top Panels - Viewed From Front
top corner panel and secure front ange to clips
with two (2) #8 x ½” lg. hex head SMS as shown in
Figure 30a. Secure rear ange to outer top corner
panels with two (2) #8 x ½” lg. SMS as shown in
Figure 30b.