Filter
Top Products
APPLIQUES
1. Attach the applique to the fabric.
1 Applique
2 Fabric glue
* The applique should be attached with fabric glue or a
basting stitch so that it will not move during sewing.
2. Attach presser foot “J”. Make sure that the needle drop point
is just outside the applique and then start sewing.
1 Applique
* When the automatic thread cutting and automatic
reinforcement stitch are preset, reinforcement stitches will
be sewn automatically at the start of sewing. Press the
“REVERSE STITCH” button to sew a reinforcement stitch
and trim the thread automatically at the finish of sewing.
3. Finish
1 Applique
2 Needle drop point
J
Sewing the applique around corners
1. Stop the machine and position the needle just outside the
applique.
2. Raise the presser foot and turn the fabric as needed to keep
the correct needle position.
77
Utility
Stitches
Characters
and
Decorative
Stitches
Embroidering
Editing
Embroidery
Patterns
Retrieving
My
Custom
Stitch
TM
Maintenance
Error
Messages
Trouble
shooting
Sewing
Chart
Patterns
(Programmed
in Machine)
Patterns
(Memory
Card)
Sewing
Setting Up