Filter
Top Products
GATHERING
J
Use on waists of skirts, the sleeves of shirts, etc.
1. Set the stitch length to 4.0 mm (3/16”) and the thread
tension to weak.
* If you touch the “GATHERING” key after touching the
“ ” key, the stitch length will be set automatically to
4.0 mm (3/16”) and the thread tension will be set
automatically to weak.
1
2
3
2. Attach presser foot “J”. Pull out the bobbin and upper
threads by 5 cm (1-15/16”).
1 Upper thread
2 Bobbin thread
3 About 5 cm (1-15/16”)
3. Sew two rows of straight stitches parallel to the seam line,
then trim excess thread leaving 5 cm (1-15/16”) .
1 Seam line
2 1.0 to 1.5 cm (3/8” to 9/16”)
3 About 5 cm (1-15/16”)
4. Pull the bobbin threads to obtain the desired amount of
gather, then tie the threads.
71
Utility
Stitches
Characters
and
Decorative
Stitches
Embroidering
Editing
Embroidery
Patterns
Retrieving
My
Custom
Stitch
TM
Maintenance
Error
Messages
Trouble
shooting
Sewing
Chart
Patterns
(Programmed
in Machine)
Patterns
(Memory
Card)
Sewing
Setting Up