Filter
Top Products
FLAT FELL SEAM
J
Use for reinforcing seams and finishing edges neatly.
1. Attach presser foot “J”. Sew the finish line, then cut half of
the seam allowance from the side that the flat fell seam will
lie.
1 About 1.2 cm (1/2”)
2 Reverse side
* When the automatic thread cutting and automatic
reinforcement stitch are preset, reinforcement stitches will
be sewn automatically at the start of sewing. Press the
“REVERSE STITCH” button to sew a reinforcement stitch
and trim the thread automatically at the finish of sewing.
2. Spread out the fabric along the finish line.
1 Finish line
2 Reverse side
3. Press both seam allowances toward the more narrow (cut
one) side and iron them.
1 Reverse side
4. Fold the longer seam allowance around more narrow one,
and sew the edge of the fold.
1 Reverse side
75
Utility
Stitches
Characters
and
Decorative
Stitches
Embroidering
Editing
Embroidery
Patterns
Retrieving
My
Custom
Stitch
TM
Maintenance
Error
Messages
Trouble
shooting
Sewing
Chart
Patterns
(Programmed
in Machine)
Patterns
(Memory
Card)
Sewing
Setting Up