Filter
Top Products
AUTOMATIC THREAD CUTTING
If you set programmed automatic thread cutting
prior to sewing, the machine will automatically
trim the thread when the pattern has been
completed. (Reinforcement stitches are used at
the start and finish of the pattern.)
1. Select the stitch pattern.
2. Touch the automatic thread cutting key.
* Automatic thread cutting and the automatic
reinforcement stitch must be used together.
* Automatic thread cutting is convenient for use
on buttonholes, bar tacking and other areas.
1
START
STOP
3. Press the “START/STOP” button. A
reinforcement stitch will be sewn before
sewing starts.
4. When sewing is completed, press the
“REVERSE STITCH” button to sew a
reinforcement stitch and trim the thread.
1 Automatically trims the thread and stops.
* Fabric should be placed 3 to 4 stitch lengths
behind the presser foot before sewing the
reinforcement stitch.
Touching the automatic thread cutting key again
turns off the automatic thread cutting function.
The thread can be cut automatically.
Cancelling programmed automatic thread cutting
39
Utility
Stitches
Characters
and
Decorative
Stitches
Embroidering
Editing
Embroidery
Patterns
Retrieving
My
Custom
Stitch
TM
Maintenance
Error
Messages
Trouble
shooting
Sewing
Chart
Patterns
(Programmed
in Machine)
Patterns
(Memory
Card)
Sewing
Setting Up