Filter
Top Products
66
Utility
Stitches
Characters
and
Decorative
Stitches
Embroidering
Editing
Embroidery
Patterns
Retrieving
My
Custom
Stitch
TM
Maintenance
Error
Messages
Trouble
shooting
Sewing
Chart
Patterns
(Programmed
in Machine)
Patterns
(Memory
Card)
Sewing
Setting Up
BASTING
1. Attach presser foot “J”. It is suggested that the basting stitch
be started with a reinforcement stitch by pressing the
“REVERSE STITCH” button.
Note
If you do not want to use a reinforcement stitch at the
beginning, you should lift the presser foot, rotate the hand
wheel, pull up the bobbin thread and pull a length of top and
bobbin thread out from the rear of the machine.
* You can change the length of one stitch to between 5 mm
and 30 mm (3/16” to 1-3/16”).
1 5 mm to 30 mm (3/16” to 1-3/16”)
2. Sew while keeping the fabric taut.
3. End sewing with a reinforcement stitch.
J
1