52
Utility
Stitches
Characters
and
Decorative
Stitches
Embroidering
Editing
Embroidery
Patterns
Retrieving
My
Custom
Stitch
TM
Maintenance
Error
Messages
Trouble
shooting
Sewing
Chart
Patterns
(Programmed
in Machine)
Patterns
(Memory
Card)
Sewing
Setting Up
BLIND HEM STITCHES
1 Other fabric
2 Stretch fabric
R
12
13
5
1. Fold the fabric and baste it as illustrated.
1 0.5 cm (3/16”)
2 Surface
3 0.5 cm (3/16”)
4 Reverse side
5 Basting stitch
1
2. Attach presser foot “R”. Lower the presser
foot so that its guide meets the edge of the
folded hem.
1 Guide
2 Folded hem
R
3. Adjust the needle position using the stitch
width setting keys so that needle slightly
catches the fold of the hem, and then sew the
fabric.
1 Needle drop position
* When the automatic thread cutting and
automatic reinforcement stitch are preset, a
reinforcement stitch will be sewn automatically
at the start of sewing. Press the “REVERSE
STITCH” button to sew a reinforcement stitch
and trim the thread automatically at the finish
of sewing.
4. Turn over the fabric and remove the basting
stitch.
1 Reverse side
2 Surface