Filter
Top Products
70
Utility
Stitches
Characters
and
Decorative
Stitches
Embroidering
Editing
Embroidery
Patterns
Retrieving
My
Custom
Stitch
TM
Maintenance
Error
Messages
Trouble
shooting
Sewing
Chart
Patterns
(Programmed
in Machine)
Patterns
(Memory
Card)
Sewing
Setting Up
DART SEAM
1
1. Attach presser foot “J”. Sew a reverse stitch at the
beginning of the dart and then sew from the wide end to the
other end without stretching the fabric.
1 Basting
* If automatic reinforcement stitching is preset, a
reinforcement stitch will automatically be sewn at the sewing
start.
2. Do not sew a reverse stitch at end. Cut the thread at the end
leaving 5 cm (1-15/16”), and then tie both ends together.
3. Insert the ends of the thread into the dart with a needle.
4. Iron the dart to one side so that it is flat.
J