Filter
Top Products
1
6. Remove the embroidery sheet before starting to embroider.
1 Hole for removing
1. Raise the presser foot to its highest position. Then pass the
embroidery frame under the presser foot with the mounting
bracket on the left side and the fabric right side up.
2
1
2. Align the two pins on the embroidery unit frame holder with
the mounting bracket on the frame, and then press the
frame into the embroidery unit frame holder until a click is
heard.
1 Embroidery arm frame holder
2 Pins
* Be sure to insert both pins. If only the forward or the back
pin is inserted, the pattern may not turn out correctly.
1
Removing the embroidery frame
While pushing the lever of the embroidery frame holder to the
left, lift the embroidery frame up to remove it.
1 Lever
Be sure to wait until the embroidery unit has finished
initializing before fitting the embroidery frame. (Refer to
page 109.)
Fitting the embroidery frame to the embroidery unit
119
Utility
Stitches
Characters
and
Decorative
Stitches
Embroidering
Editing
Embroidery
Patterns
Retrieving
My
Custom
Stitch
TM
Maintenance
Error
Messages
Trouble
shooting
Sewing
Chart
Patterns
(Programmed
in Machine)
Patterns
(Memory
Card)
Sewing
Setting Up