Filter
Top Products
Installation and Operating Manual | VideoJet 8008 / VideoJet 8004
EN | 90
Configuration using a Web browser Bosch Security Systems | 2006-07 | V1.5
Alarm recording
Here, you can specify the times during which continuous recording to the hard
drives should take place in the event of an alarm.
As with time recording, there are separate selection fields for each partition and
thus for each camera input. You can select up to 16 separate periods for each day
of the week. Alarm recording occurs only during the highlighted time intervals.
Note
If a time interval has already been selected for time recording, you cannot
select it for alarm recording (see Time recording, page 88).
Caution
Alarm tracks must be set up in the required partition for alarm recording
(see Number of alarm tracks, page 91).
The unit uses a special recording mode during alarm recording for optimal usage
of storage capacity: as soon as a time gap for alarm recording begins, a record-
ing is continuously made on one segment, which is the size of a complete alarm
sequence (pre- and post-alarm time).