Filter
Top Products
Installation and Operating Manual | VideoJet 8008 / VideoJet 8004
EN | 72
Configuration using a Web browser Bosch Security Systems | 2006-07 | V1.5
MPEG-4 encoder
For encoding the video signal, you can select a profile for each camera, and for
Dual Streaming compatible units you can select two profiles each.
You can identify the Dual Streaming compatible units from the additional
MPEG-4 Stream 2 tab.
Selecting a profile
You can configure the MPEG-4 data transmission in accordance with the oper-
ating environment (for example network structure, bandwidth, data load). For
Dual Streaming compatible units, each encoder can create two data streams at
the same time, with different compression settings, such as for transmission and
local saving.
Note
The settings must be made individually for each camera input and stream.
The numbering is the same as the labeling of the video inputs on the rear
panel of the unit.
Pre-programmed profiles are available, each giving priority to different perspectives.
❚ Profile 1: Low bandwidth (CIF)
High quality for low bandwidth connections,
resolution 352 × 288/240 pixels
❚ Profile 2: Low delay (1/2 D1)
High quality with low delay,
resolution 352 × 576/480 pixels