Filter
Top Products
Installation and Operating Manual | VideoJet 8008 / VideoJet 8004
EN | 60
Configuration using a Web browser Bosch Security Systems | 2006-07 | V1.5
COM settings
You can configure the parameters of the RS232/485 serial interface to meet
your requirements. On audio versions, you can also configure the parameters of
the second RS232 serial interface.
COM1
Note
If the unit is working in multicast mode (see page 57 onward), the first re-
mote location to establish a video connection to the unit is also assigned
the transparent data connection. However, after about 15 seconds of inac-
tivity the data connection is automatically terminated and another remote
location can exchange transparent data with the unit.
Serial port function:
Select a controllable unit from the list. If you wish to use the serial port to transmit
transparent data, select Transparent. Select Terminal if you wish to operate
the unit from a terminal.
Note
After selecting a unit, the remaining parameters in the window are set au-
tomatically and should not be changed.