Filter
Top Products
Installation and Operating Manual | VideoJet 8008 / VideoJet 8004
EN | 122
Operation Bosch Security Systems | 2006-07 | V1.5
Camera control
The options for controlling peripheral devices (for example a pan/tilt camera
head or a dome camera) are dependent on the unit type installed and on the
configuration of the VIP X1600.
If a controllable unit is connected and configured, the operating items for control-
ling the peripheral device can be seen to the left of the video image.
– To control a peripheral, click the appropriate controls.
– Move the mouse cursor over the video image. Additional options for control-
ling peripherals are displayed with the mouse cursor.
Digital I/O
In the event of an alarm, the green alarm LED for the triggering alarm input appears
next to the video image. The unit's configuration determines whether the alarm is
displayed, as well as additional details (see
Livepage configuration
, page 112).
The alarm symbols
Input 1
to
Input 10
are for information purposes and show the
input status of an alarm input:
Active high
= icon lit green,
Active low
= icon not lit.