Filter
Top Products
Installation and Operating Manual | VideoJet 8008 / VideoJet 8004
EN | 54
Configuration using a Web browser Bosch Security Systems | 2006-07 | V1.5
Auto-connect:
Select the On option to automatically re-establish a connection to one of the
previously specified IP addresses after each restart, after a connection break-
down or after a network failure.
Note
Dual Streaming compatible units only: Stream 2 is always transferred for
alarm connections. Bear this fact in mind when assigning the profile
(see page 34).
Default camera:
Here you can select the camera whose image will be automatically displayed
first on the receiver when the alarm connection is made. Depending on the sys-
tem configuration, the receiver can then select the other cameras as well.
Note
The numbering is the same as the labeling of the video inputs on the rear
panel of the unit.