VideoJet 8008 / VideoJet 8004 | Installation and Operating Manual
EN | 65
Bosch Security Systems | 2006-07 | V1.5 Configuration using a Web browser
Password
A unit is generally protected by a password to prevent unauthorized access to the
unit. You can use different authorization levels to limit access.
Note
Proper password protection is only guaranteed when all higher authoriza-
tion levels are also protected with a password. If a live password is as-
signed, for example, a service and a user password must also be set.
When assigning passwords, you should therefore always start from the
highest authorization level.
User name:
The unit operates with three user names: service, user and live, which corre-
spond to different authorization levels.
The service user name is the highest authorization level. After entering the cor-
rect password, this user name allows you to use all the functions of the unit and
change all configuration settings.
The user user name is the middle authorization level. You use it to operate the
unit and also to control cameras, for example, but you cannot change the con-
figuration.
The live user name is the lowest authorization level. It can only be used to view
the live video image and switch between the different live image displays.
Password:
You can define and change a separate password for each user name if you are
logged in as service or if the unit is not password protected.
Enter the password for the selected user name here.