Filter
Top Products
Installation and Operating Manual | VideoJet 8008 / VideoJet 8004
EN | 124
Operation Bosch Security Systems | 2006-07 | V1.5
Saving snapshots
You can save individual images from the video sequence currently shown on the
LIVEPAGE in JPEG format on your computer's hard drive.
– Click the icon for saving single images. The image is saved at a resolution of
704 × 576 pixels (4CIF/D1). The storage location depends on the configura-
tion of the unit (see page 114).
Recording video sequences
You can save sections of the video sequence currently shown on the LIVEP-
AGE on your computer's hard drive.
– Click the icon for recording video sequences to start recording. The storage
location depends on the configuration of the unit (see page 114). The flashing
red dot in the icon indicates that recording is in progress.
– Click the icon for recording video sequences again to stop recording.
Image resolution
The sequences will be recorded at the resolution specified in the encoder con-
figuration (see pages 38 and 76).
Installing MPEG viewer
You can play back saved video sequences using the MPEG viewer from
Bosch Security Systems, which can be found on the product CD supplied
(see Components supplied, page 9).
Note
Suitable MPEG ActiveX software must be installed on the computer in or-
der to play back saved video sequences using the MPEG viewer. Further
information can be found on page 29.