Filter
Top Products
Installation and Operating Manual | VideoJet 8008 / VideoJet 8004
EN | 88
Configuration using a Web browser Bosch Security Systems | 2006-07 | V1.5
– Click the Start button to activate the currently selected partition for recording.
– Click the Start all button to activate all the partitions set up for the recording.
– Click the Stop button to deactivate the currently selected partition for record-
ing. Recordings that are currently running will be interrupted and the config-
uration can be modified.
– Click the Stop all button to deactivate all the partitions set up for the record-
ing. Running recordings are interrupted and the configuration can be
changed.
Time recording
You can specify the times during which continuous recording to the hard drive
should take place.
Separate selection fields per partition are available for each day of the week,
allowing settings to be made per camera input. You can select up to 16 individual
recording time intervals for each day of the week.
Note
If a time interval has already been selected for alarm recording, you cannot
select it for time recording (see Alarm recording, page 90).
– Left-click the point in the schedule at which recording should start and hold
the button down.
– Drag the selected field to the desired recording end and then release the
mouse key.
– Right-click a highlighted time interval to delete it.
– Click the Select all button to highlight all time intervals.
– Click the Clear button to delete all highlighted time intervals.