Filter
Top Products
Monitoring
4–8 975-0704-01-01 Revision A
4. Click in the left side menu, if you want general energy-related
information gathered by the device, such as energy consumption, output,
and load.
5. Click in the left side menu, if you want information about faults
and warnings reported by the device.
NOTICE
EQUIPMENT DAMAGE
• Consult the device Owner’s Guide when changing the device’s settings.
• Ensure that the Xanbus-enabled device connected to the network is in
standby mode before changing settings. See “To set a device in Standby
mode:” on page 3–31.
• Do not change any settings unless you are familiar with the device.
Failure to follow these instructions can damage equipment.