Filter
Top Products
Configuration
3–34 975-0704-01-01 Revision A
2. Click the Device Setting type you want to change.
That portion of the window will expand to display the change options for that
setting.
3. In the expanded window, click to see the current setting. This may be
different from the value shown, if the change was made in another way – for
example, another device like the SCP was used to change the value.
4. Modify the value(s) as necessary.
5. Click to save the change(s).
Using Cascading Parameters
Xanbus-enabled devices are typically configured one at a time. However,
because devices often have common settings, cascading parameters can
simplify and speed up system configuration. When a parameter is “cascaded,” a
newly configured device setting on one device is applied to all devices of the
same device type on a common AC or DC connection.
For example, if cascading parameters are enabled and a Battery Size (Ah)
parameter is changed on the Freedom SW inverter setup menu, the same battery
size setting is applied to the second inverter.
To enable or disable cascading parameters:
1. Put the device on standby mode. See “To set a device in Standby mode:” on
page 3–31.
2. Click to access the individual devices menu.