Filter
Top Products
Changing Advanced Conext ComBox Settings
975-0704-01-01 Revision A 3–15
Changing Advanced Conext ComBox Settings
The section describes how to configure the advanced Conext ComBox
parameters. To access these settings, you must be logged in as Admin.
To access all Conext ComBox settings:
1. Log in as Admin, and in the menu bar, click .
2. Click in the left side menu.
You will see a screen similar to the one shown below.
Set the amperage limit for the AC shore breaker
using the drop down list.
If the system has both a Freedom Sequence power
management system and a Freedom SW inverter/
charger installed, this setting applies to both
devices. If the system does not have a Freedom
Sequence, then only the Freedom SW inverter/
charger shore breaker size is set.
When input current exceeds the selected value, the
Freedom SW inverter/charger reduces its charge
current to limit the total power to 80% of this setting,
and the Freedom Sequence progressively sheds low
priority loads to avoid unnecessary tripping of the
AC shore breaker.