Filter
Top Products
Configuration
3–10 975-0704-01-01 Revision A
E-mail Server Address Specify the mail server address
provided by the Internet service
provider. It has the format
mailserver.yourdomain.com. Contact
your Internet service provider for the
correct information.
E-mail Server Port Specify the port number used by a
computer to transmit electronic data
through the Internet. The number 25 is
typically reserved for e-mail.
E-mail Recipients Enter multiple e-mail addresses
separated by a comma and no space.
Any address listed here will receive e-
mail messages generated by the
Conext ComBox.
E-mail Authentication Enable or disable an external e-mail’s
authentication settings. When enabled,
you have to supply the E-mail User ID
and E-mail Password below.
E-mail User ID Specify the external e-mail account’s
user ID, which is usually the full e-mail
address that includes the domain
name.
E-mail Password Specify the external e-mail account’s
password.
Lost Password E-Mail Recipients Specify a valid e-mail address where
the current password or a random
temporary password can be sent.
For multiple e-mail recipients, separate
the addresses with a comma and no
space.
Lost Password E-Mail From Address Specify a valid e-mail address that can
be used as an identifier of the sender.
Generally, the sender is also the user of
the Conext ComBox.
By default, this is set to no-
reply@schneider-electric.com and
typically does not need to be changed.
Reset Lost Passwords Select No to send the current
password by e-mail.
Select Yes to generate a random
temporary password to be sent by
e-mail.