Filter
Top Products
Configuration
3–18 975-0704-01-01 Revision A
To change the user password:
1. Enter the Old Password.
2. Enter your New Password.
The password should contain at least eight alphanumeric (0-9, a-z, A-Z)
characters with no special characters and spaces. Passwords are
case-sensitive and the maximum length is 32 characters.
3. Enter the New Password (confirm) again.
4. Click Submit.
A message indicates that the password change was successful.
Change Admin Password Settings
The Change Admin Password setting applies only to the Conext ComBox admin
account.
See “Changing the Admin Password” on page 3–5.
TCP/IP Settings
By default, the Use DHCP parameter is set to Yes. By enabling DHCP, the four
parameters (TCP/IP Address, TCP/IP Net Mask, Gateway Address, and DNS
Server Address) are filled automatically. If the Use DHCP parameter is set to No,
you have to manually fill the four parameters with static IP addresses.
Note: Only a qualified IT professional should perform changes to TCP/IP
related settings.