Filter
Top Products
Changing Device Settings
975-0704-01-01 Revision A 3–33
5. Click in the left side menu.
6. You will see a list of Device Settings for that type of device.
7. Click to expand the Controls setting.
8. Change the Operating Mode parameter to Standby.
9. Click to save the setting.
To change a Device Setting after putting the device on Standby:
1. After putting a device on Standby mode, proceed to change the device’s
other settings.
Important: Device settings for each Xanbus device vary. Be sure to consult the
device’s Owner’s Guide before trying to change the settings via the Conext
ComBox.