Filter
Top Products
Installation
2–14 975-0704-01-01 Revision A
7. Insert the ferrules into the Modbus connector’s wire terminals as shown.
8. Secure the wires by tightening the screws on the terminal.
9. Plug the Modbus connector into the RS 485 port of the Conext ComBox.
10. Turn on the 24 V DC power supply.
11. Go to step 2 of “Turning On the Conext ComBox”.
Note
: The polarity of the wires is shown above and on the unit.
3/8 in.
(10 mm)
power supply
24 V (+)
0 V (–)
1A DC fuse on
the positive wire