Filter
Top Products
975-0704-01-01 Revision A iii
About This Guide
Purpose
The purpose of this Owner’s Guide is to provide explanations and procedures for
installing, operating, configuring, maintaining, and troubleshooting the Conext
ComBox Communication and Monitoring Device for Freedom SW inverter/
chargers and accessories.
Scope
The Guide provides safety guidelines, planning, and setup information,
procedures for installing the Conext ComBox, as well as information about
configuring, monitoring, and troubleshooting the unit. It does include information
on how to use other Xantrex products.
Firmware Revision
Some Conext ComBox features and functions described in this guide may be
incorporated with later firmware versions. This manual is valid for Conext
ComBox – Freedom SW version 01.00 and above. To view the firmware version
on your product, see the Conext ComBox Status Information in the web user
interface.
Audience
The Guide is intended for use by anyone who plans to construct, install, or
operate a system involving the Conext ComBox–Freedom SW. The information in
this manual is intended for qualified personnel. Qualified personnel have training,
knowledge, and experience in:
• Installing electrical equipment
• Applying all applicable installation codes
• Analyzing and reducing the hazards involved in performing electrical work
• Changing any TCP/IP-related settings
Organization
This Guide is organized into five chapters and an appendix.
Chapter 1, “Overview”, describes physical features of the Conext ComBox and
introduces the user interface.
Chapter 2, “Installation”, describes how to install, wire, and connect the Conext
ComBox to your network.
Chapter 3, “Configuration”, describes how to configure and change device
settings, manage data logs, import and export data, and upgrade firmware.
Chapter 4, “Monitoring”, describes how to monitor LED indicator lights (LEDs),
system and device levels, and create historical views.
Chapter 5, “Troubleshooting”, describes how to interpret events and alerts.