Filter
Top Products
Changing Advanced Conext ComBox Settings
975-0704-01-01 Revision A 3–25
Xanbus Communications
The Xanbus Bit Rate parameter for the Conext ComBox has two possible
values: 125 and 250 Kbps. The default value for the Xanbus Bit Rate is
250 Kbps. When this setting is changed, reboot the Conext ComBox for the new
setting to take effect. See “Rebooting the Conext ComBox” on page 3–17.
Freedom SW devices and components require a 250 Kbps bit rate. You cannot
change the bit rate for Freedom SW system devices and components.
Modbus Communications
Note: Modbus support is available only for the Conext ComBox (Part Number
865-1058), and Conext Modbus Converter (Part Number 865-1059), used with
Schneider Electric Conext series inverter products.
The Modbus Communications option available with this Conext ComBox –
Freedom SW (Part Number 809- 0918), is not required for operation or
supported by Xantrex technical support.