Filter
Top Products
Physical Features
975-0704-01-01 Revision A 1–3
Physical Features
The following illustration shows the Conext ComBox. The tables in the following
sections contain descriptions of the connectors, indicators, and data ports.
Data Ports and Reset Button
The data ports and reset are located at the top, front of the Conext ComBox.
Their functions are listed in the following table.
Item Description
Reset The Reset pinhole is used to restore factory settings or clear
internal firmware memory. See “Resetting the Conext ComBox to
Factory Settings” on page 3–30 and “Clearing the Internal Firmware
Memory” on page 3–36.
Micro-SD The Micro-SD data port is used with a micro-SD card to extend
Conext ComBox memory for data logging.
Host The Host USB data port is used for uploading firmware upgrades
into the device - a thumb drive or equivalent mass storage device
can be used. See “Clearing the Internal Firmware Memory” on
page 3–36.
Device The Device USB data port is used for transferring files from the
Conext ComBox to a PC.