Filter
Top Products
62
SSCI - Suburban Surgical Company, Inc.
Chapter 4 - Operation and Care
Replacing the Digital
Readout Battery
The digital readout operates independently of the other components
in the ICU, and is powered by its own Type AAA battery. To
change the battery:
1. Open the filter/fans compartment panel (refer to Page 58).
2. On the rear of the digital readout, remove the battery
cover (Figure 71).
3. Remove the old battery.
4. Install a new Type AAA battery (Figure 72). Position the
(+) electrode to the left.
5. Replace the battery cover.
6. Close and secure the filter/fans compartment.
Figure 71. Digital Readout Battery Cover
Battery Cover
Figure 72. Digital Readout Battery
AAA Battery
(Battery Cover Removed)
(+)
Electrode