Filter
Top Products
Form No. 702718 Rev. A March, 2005 41
Owner’s Manual - Regal Intensive Care Unit
Checking Floor
Heat (Left)
1. Push the main on/off switch (Figure 40) to On. The amber
light in the switch comes on.
2. Push the left floor heat on/off button (Figures 40 and 43) to
On. The amber light in the button comes on.
3. Turn the temperature control knob (Figure 43) clockwise
until the red system light comes on. Heat to the left half-size
compartment floor comes on.
4. Watch the digital display (Figure 43). It should show a
temperature increase.
5. Wait until the system light goes out.
6. Push the left floor heat on/off button to Off. The light in the
button goes out.
7. Push the main on/off switch to Off. The light in the switch
goes out.
Figure 43. Floor Temperature Controls (Left Shown,
Controls for Right Side are Identical)
On/Off
Button
System
Light
Temperature
Control Knob
Digital
Display
Fuse
Checking Floor
Heat (Right)
Repeat Steps 1 though 7 above for the right floor temperature
controls.