Filter
Top Products
Form No. 702718 Rev. A March, 2005
21
Owner’s Manual - Regal Intensive Care Unit
A ventilating fan (Figures 23 and 24) provides a steady flow of air
through the electronics compartment to prevent overheating of the
internal components. The fan starts and stops automatically as the
main on/off switch is turned On and Off.
This spiral cord (Figure 23) transmits electrical signals from the
oxygen sensor/fuel cell to the oxygen concentration meter. These
signals allow the meter to display the current oxygen concentration
percentage to the user.
Figure 23 shows the electric power cord in its stored position,
where it is carried during shipment of the Intensive Care Unit to the
customer.
CAUTION: The Regal Intensive Care Unit requires a
dedicated, 15-amp minimum source of electrical power.
The cooling unit cools air to the animal compartment as required.
WARNING: Do not attempt to work on or dis-
assemble the cooling unit as it contains MP39
refrigerant gas under pressure. If service is required
on the unit, call SSCI Customer Service at 1-800-323-
7366, or a certified refrigeration serviceman.
27 - Ventilating Fan
28 - Data Cable to
Oxygen Concentration
Meter
29 - Electric Power
Cord
30 - Cooling Unit
Figure 24. Electric Power Cord Connection, Oxygen Connection, and Ventilating Fan
(Inside Electronics Compartment, Upper Rear Panel)
27 - Ventilating
Fan
25 - Electric
Power Cord
Connection
System
Ground
26 - Oxygen
Intake Port