Filter
Top Products
960
Revised History
FX3S/FX3G/FX3GC/FX3U/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
7/2011 J • Supported in FX3G series version 1.40
- 1 instruction added.
IVMC(FNC275)[Section 30.6]
• Supported in FX
3U and FX3UC series version 3.00
- Supports storage of symbolic information.
- Support of the setting "Read-protect the execution program" for block passwords.
- Special block error condition (D8166) is added.
- Supports connection of FX
3U-FLROM-1M.
• Errors are corrected.
2/2012 K • FX
3GC Series PLC was added.
• Supported in FX
3U and FX3UC Series version 3.10
- Special parameter error (M8489 and D8489) is added.
- The error code for parameter error is added.
- The error code for special block error is added.
• Errors are corrected.
5/2012 L • Supported in FX
3G and FX3GC Series version 2.00
• Errors are corrected.
5/2013 M • FX
3S Series PLC was added.
• Supported in FX
3G and FX3GC Series version 2.10
- The IP address change function for the FX
3U-ENET-ADP is added. [Appendix A]
• 1 instruction added.
ADPRW(FNC276)[Section 30.7]
• Supports connection of FX
3U-ENET-ADP. [Section 37.1]
• Description of the programming tool is changed accompanied by change of the
programming tool from GX Developer to GX Works2.
• Discontinued models are added. [Appendix D]
• Errors are corrected.
9/2013 N • Supported in FX
3S series version 1.10
• Supported in FX
3G series version 2.20
•FX
3S-30M/E-2AD PLC was added.
• Supports connection of FX
3G-4EX-BD, FX3G-2EYT-BD and FX3G-485-BD-RJ.
• Discontinued models are added. [Appendix D]
• Errors are corrected.
Date Created Revision Description