Filter
Top Products
911
FX3S/FX3G/FX3GC/FX3U/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
A Programming Tool Applicability and Version Upgrade History
A-2 Peripheral product applicability (except programming tools)
31
FNC277-FNC279
Data
Transfer 3
32
FNC280-FNC289
High-Speed
Processing 2
33
FNC290-FNC299
Extension File
Register Control
34
FNC300-FNC305
FX
3U
-CF-ADP
35
SFC•STL
Programming
36
Interrupt
Function
37
Special Device
38
Error Code
A
Version Up
Information
B
Execution Times
Appendix A-2 Peripheral product applicability (except programming tools)
Appendix A-2-1 Peripheral product applicability
FX3S PLC
Product Name Applicability Remarks
GOT1000 Series Applicable
Standard monitor OS, communication driver and option OS which support the FX3S PLC
are required.
For details, refer to the GOT manual.
This series is subject to the following restrictions when connected using unsupported
standard monitor OS, communication driver or option OS.
Contents of restrictions
• When connected using standard monitor OS, communication driver and option OS
which support the FX3G PLC
- Programming is enabled only in the function range such as instructions,
device ranges and program sizes available in both the FX
3S PLC and the FX3G
PLC.
• When connected using standard monitor OS, communication driver and option OS
which do not support the FX
3G PLC
- Programming is enabled only in the function range such as instructions,
device ranges and program sizes available in both the FX3S PLC and the FX1N
PLC.
- The list editor function for MELSEC-FX is not available. When using the list editor
function for MELSEC-FX, upgrade the standard monitor OS, communication driver
and option OS to the version compatible with the FX3S PLC.
Check the applicability of other items in the GOT manual.
GOT-F900 Series Not applicable
The following restriction applies when connected.
Contents of restrictions
Programming is enabled only in the function range such as instructions,
device ranges and program sizes available in both the FX3S PLC and the FX1N PLC.
For applicable models, refer to the GOT manual.
For connection using the 2-port interface function
*1
, refer to Appendix A-1-4.
FX-10DM(-SET0) Not applicable
The following restriction applies when connected.
Contents of restrictions
Programming is enabled only in the function range such as instructions,
device ranges and program sizes available in both the FX
3S PLC and the FX1N PLC.
For supported models and device ranges, refer to the FX-10DM USER’ MANUAL
(Manual No. JY992D86401).