Filter
Top Products
318
FX3S/FX3G/FX3GC/FX3U/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
12 Data Operation – FNC 40 to FNC 49
12.1 FNC 40 – ZRST / Zone Reset
3. Caution for simultaneous instances of the ZRST instruction and the PLS instruction
The ZRST instruction resets the last stage for the PLS instruction and PLF instruction of the applicable device. In
addition, the reset state of T and C is also reset.
Please program in the following way to turn on M0 only once.
Circuit program
M0
X000
M0PLS
M100M0
Timing chart
one operation
cycle
one operation
cycle
ZRST instruction
execution
ZRST instruction
execution
PLS instruction
execution
PLS instruction
execution
X000
M0
FNC 40
ZRST
Circuit program
M0
X000
M0
M100M0
FNC 40
ZRST