Filter
Top Products
Introduction, Features, and Options Teledyne API T801 NDIR CO2 Analyzer Operation Manual
18
1.3. OPTIONS
Table 1-1 presents the options available with the T801 analyzer. For assistance
with ordering, please contact the Sales department of Teledyne API at:
PHONE (toll free,
North America)
800-324-5190
FAX:
858-657-9816
PHONE (Direct):
858-657-9800
E-MAIL:
api-sales@teledyne.com
WEB SITE
www.teledyne-api.com
Table 1-1. Analyzer Options
Option
Option
Number
Description/Notes Reference
Pumps
Pumps meet all typical AC power supply standards while exhibiting same pneumatic
performance.
10A External Pump 100V - 120V @ 60 Hz N/A
10B External Pump 220V - 240V @ 50 Hz N/A
10C External Pump 220V - 240V @ 60 Hz N/A
10D External Pump 100V – 120V @ 50 Hz N/A
10E External Pump 100V @ 60 Hz N/A
14 Internal Pump N/A
13 High Voltage Internal Pump 240V @ 50Hz N/A
Rack Mount
Kits
Options for mounting the analyzer in standard 19” racks
20A Rack mount brackets with 26 in. chassis slides N/A
20B Rack mount brackets with 24 in. chassis slides N/A
21 Rack mount brackets only (compatible with carrying strap, Option 29) N/A
23 Rack mount for external pump pack (no slides) N/A
Carrying Strap/Handle Side-mounted strap for hand-carrying analyzer
29
Extends from “flat” position to accommodate hand for carrying.
Recesses to 9mm (3/8”) dimension for storage.
Can be used with rack mount brackets, Option 21.
Cannot be used with rack mount slides.
N/A
CAUTION - GENERAL SAFETY HAZARD
THE T801 WEIGHS ABOUT 28 POUNDS (12.7 KG). TAKE CARE TO
AVOID PERSONAL INJURY WHEN LIFTING/CARRYING THE
ANALYZER.
ALSO, DISCONNECT ALL CABLES AND TUBING FROM THE
ANALYZER BEFORE MOVING IT.
Analog Inputs w/USB port
Used for connecting external voltage signals from other instrumentation (such as
meteorological instruments).
64B
Also can be used for logging these signals in the analyzer’s internal
DAS. (See Option 64A for USB port only).
Sections 3.3.1.2
and 5.9.3.12
07274B DCN6418