Filter
Top Products
Teledyne API T801 NDIR CO2 Analyzer Operation Manual Data Acquisition System (DAS) & APICOM
135
7.1.4. SETUP DAS EDIT: ACCESSING THE DAS EDIT MODE
DAS configuration is most conveniently done through the APICOM remote
control program. The following sequence of menu items shows how to edit using
the front panel.
EDIT Channel Menu
Main DAS Menu
SETUP X.X PRIMARY SETUP MENU
CFG ACAL DAS RNGE PASS CLK MORE EXIT
SETUP X.X DATA ACQUISITION
VIEW EDIT EXIT
SETUP X.X 0) CONC: ATIMER,3,4032,RS232
NEXT INS DEL EDIT PRNT EXIT
SETUP X.X ENTER PASSWORD:818
8 1 8 ENTR EXIT
Enters EDIT mode for the selected channel
PRINT
PREV
INS
NEXT
DEL
Button
Exports the configuration of all data channels to the
RS-232 interface
Selects the previous data channel in the list
Inserts a new data channel into the list BEFORE the
selected channel
Selects the next data channel in the list
Deletes the currently selected data channel
FUNCTION
Buttons only appear when applicable.
DAS EDIT – Touchscreen Functions
EDIT
Enters EDIT mode
SAMPLE CO2 RNG=20.00 % CO2=XXX.XX
<TST TST> CAL MSG SETUP
When editing the data channels, the top line of the display indicates some of the
configuration parameters.
For example, the display line:
0) CONC: ATIMER, 3, 4032, RS232
Translates to the following configuration:
0
Channel No.
CONC
Channel Name
ATIMER
Trigger Event
3
Parameters – number of parameters included in this channel
4032
Number of records this channel is set up to store
RS232
Port via which values automatically reported
07274B DCN6418