Filter
Top Products
17
1. INTRODUCTION, FEATURES, AND OPTIONS
1.1. T801 OVERVIEW
The Model T801 NDIR CO
2
Analyzer is a microprocessor-controlled analyzer
that employs Non-Dispersive Infrared (NDIR) spectroscopy to determine the
concentration of molecular carbon dioxide (CO
2
) in the sample gas drawn
through the instrument. It uses infrared absorption to measure CO
2
.
The Model T801 analyzer’s multi-tasking software gives the ability to track and
report a large number of operational parameters in real time. These readings are
compared to diagnostic limits kept in the analyzer’s memory where, should any
fall outside of those limits, the analyzer issues automatic warnings.
Built-in data acquisition capability using the analyzer's internal memory allows
logging of multiple parameters including averaged or instantaneous concentration
values, calibration data, and operating parameters such as pressure and flow rate.
Stored data are easily retrieved through rear panel communications ports via our
APICOM software, allowing operators to perform predictive diagnostics and
enhanced data analysis by tracking parameter trends. Multiple averaging periods
of one minute to 365 days are available for over a period of one year.
1.2. FEATURES
Some of the exceptional features of your T801 NDIR CO
2
Analyzer are:
Non-depleting, CO
2
measurement technologies:
Virtually no cross-sensitivities
Rapid response times
No consumable parts
Consistent performance over time
Microprocessor controlled for versatility
LCD Graphical User Interface with capacitive touch screen
Multi-tasking software for viewing of test variables during operation
Continuous self checking with alarms
Bi-directional USB (option), RS-232, and 10BaseT/100BaseT Ethernet ports
for remote operation (optional RS-485)
Front panel USB ports for peripheral devices
Digital status outputs to indicate instrument operating condition
Adaptive signal filtering to optimize response time
Internal data logging with 1 min to 365-day multiple average
Remote operation when used with Teledyne API’s APICOM software
Temperature and Pressure Compensation
Ranges, 0-1% to 0-20.0%, user adjustable
07274B DCN6418