Teledyne T801 Carbon Monoxide Alarm User Manual


 
Communications Setup and Operation Teledyne API T801 NDIR CO2 Analyzer Operation Manual
128
To assign or reset the status flag bit assignments, press:
(The ACAL submenu in the Primary Setup Menu is a special configuration; consult factory).
6.5.2.9. INSTRUMENT ID
Each instrument on a Hessen Protocol network must have a unique ID code. If
more than one T801 analyzer is on the Hessen network, you will have to change
this code for all but one of the T801 analyzer’s on the Hessen network (see
Section 5.7.1). The default ID code for the T801 analy
zers is either 0 or 801.
07274B DCN6418