Lucent Technologies SLV 9124 Window User Manual


 
Index
IN-7
9124-A2-LB20-00 March 2000
Payload Loopback, 6-24
performance statistics, 5-25, 6-2
clearing, 5-26
Performance Wizard, copying directory, 8-2
physical
data port options, 3-28
DSX-1, 3-30
tests, 6-22
pin assignments
COM port, C-2
to-LAN cables, C-3
Port-1 V.35 connector, C-6
T1 line interface cable, C-8
T1 network cable, C-8
V.35 crossover cable, C-7
Ping test, 6-31
PLB, 6-24
Port
(DTE) Initiated Loopbacks, 3-29
Access Level, 3-64, 4-3
assignment, clearing, 3-39
bursting, 1-3
communication, options, 3-63
control leads, 5-6
LED, 5-5
Use, 3-63
PPP, 3-66
Primary Clock
Failed, 5-16, 6-11
Source, 3-22
Primary Destination
DLCI, 3-47
EDLCI, 3-47
Link, 3-47
Primary Frame Relay Link, 3-52
Primary Link RIP, 3-53
printed reports, 9-7
problem indicators, 6-2
product-related documents, ix
Proprietary, RIP, 3-53, 3-66
Protocol
address resolution, 1-3
Link, 3-66
LMI, 3-40
Point-to-Point (PPP), 3-66
Routing Information (RIP), 3-53, 3-66
Serial Line, IP (SLIP), 3-66
Simple Network Management (SNMP), 3-54
PVC
availability, 1-3
connection status, 5-21
connections, 3-46
total number, 1-3
Loopback, 6-20
Management, 3-51
total number dedicated, 1-3
name, 3-49, 3-50, 3-60
tests, 6-19
troubleshooting problems, 6-15
Q
quality of service, 3-45
Quick Reference, 3-4
R
ratios, FDR and DDR, 1-2
rear panel, C-1
remote
loopbacks, 6-27, 6-29
units, minimal configuration, 3-8
Repeater Loopback, 6-25
reports, Network Health, 9-7
resetting
statistics, 5-26
the unit, 6-3
unit default configuration options, 6-4
restoring communication with a misconfigured unit, 6-4
retrieving statistics, 5-41
Return (Enter) key, 2-6
revision, software and hardware, 5-2
RFC 1213 and 1573, B-2
RFC 1315, B-2
RFC 1406, B-2
RFC 1604, B-2
RFC 1659, B-2
RFC 1757, B-2
RFC 2021, B-2
right arrow key, 2-6
RIP, 1-3, 3-15, 3-66
RJ48C, COM Port connector, C-8
RLB, 6-25
RMON
alarm and event defaults, B-15
Specific Traps, B-14
Traps, 3-61
user history collection, 1-3