Filter
Top Products
SNMP MIBs and Traps, and RMON Alarm Defaults
B-22
9124-A2-LB20-00March 2000
Object ID Cross-References (Numeric Order)
The FrameSaver unit supports automatic generation of RMON alarm and event
information. Each alarm sets an SNMP variable to monitor. When the threshold
set for the monitored variable is exceeded, an SNMP trap is sent and/or a log
entry is made.
This table is helpful in identifying alarm conditions being tracked when viewing
the NetScout Custom History screen (shown below), which provides the OID
instead of the alarm condition.
See Table B-14 for an RMON history OID cross-reference and Table B-15 for an
RMON alarm OID cross-reference.