Filter
Top Products
Operation and Maintenance
5-8
9124-A2-LB20-00
March 2000
Table 5-5. Device Messages (2 of 5)
Message What To DoWhat It Indicates
File Transfer Failed –
Invalid file
(Seen at an FTP
terminal.)
A file transfer was
attempted, but it was not
successful.
H Try again, making sure you
type the filename correctly.
H Exit the FTP session, or
download another file.
See Changing Software.
Invalid Character (x) A non-valid printable ASCII
character has been
entered.
Reenter information using valid
characters.
Invalid date: must be
mm/dd/yyyy
A non-valid date was
entered on the System
Information screen.
Reenter the date in the
month/day/4-digit year format.
Invalid date and/or
time
A non-valid date or time
was entered on the System
Information screen. The
date does not exist (e.g.,
February 30th).
Reenter the date in the
month/day/4-digit year format
and/or time in the
hour:minutes:seconds format.
Invalid time: must be
hh:mm:ss
A non-valid system time
was entered on the System
Information screen.
Reenter the time in the
hour:minutes:seconds format.
Invalid – Already
Active
A test was already in
progress when it was
selected.
No action needed.
Invalid Password Login is required and an
incorrect password was
entered; access is denied.
H Try again.
H Contact your system
administrator to verify your
password.
Invalid Test
Combination
A conflicting loopback or
pattern test was in progress
when Start was selected to
start another test, or was
active on the same or
another interface when
Start was selected.
H Wait until other test ends and
message clears.
H Cancel all tests from the Test
screen (Path: main/test).
H Stop the test from the same
screen the test was started
from.
Limit of six Login IDs
reached
An attempt to enter a new
login ID was made, and the
limit of six login/password
combinations has been
reached.
H Delete another login/password
combination.
H Reenter the new login ID.
Limit of Mgmt PVCs
reached
New was selected from the
PVC Connection Table and
the maximum number of
management PVCs has
already been created.
H Do not create the
management PVC.
H Delete another management
PVC, and try again.