Support User Manuals

Lucent Technologies SLV 9124 Window User Manual

Open as PDF

of 271

SNMP MIBs and Traps, and RMON Alarm Defaults

B-13

9124-A2-LB20-00

March 2000

Table B-7. enterprise-Specific Traps and Variable-Bindings (3 of 3)

Trap Possible CauseVariable-Bindings

enterpriseSecondary-

ClockFail(4)

H devLastTrapString

(devHealthAndStatus.-

mib)

Operating software has detected

that the secondary clock source

has failed.

String:

‘Secondary clock failed.’

enterpriseSecondary-

ClockFailClear(104)

Operating software has detected

that the secondary clock source

is operational again.

String:

‘Secondary clock restored.’

enterpriseSelfTest-

Fail(2)

H devLastTrapString

(devHealthAndStatus.-

mib)

Unit has completed

(re)initialization and a hardware

failure was detected.

String:

‘Self test failed: $s.’ ($s is the

contents of devSelfTestResult.)

enterpriseTest-

Start(5)

For physical interfaces and

frame relay links:

H ifIndex (RFC 1573)

H .0.0 (placeholder)

H devLastTrapString

(devHealthAndStatus.-

mib

F i l i i (DLCI )

At least one test has been

started on an interface or virtual

circuit.

String:

‘$testString test started on

$ifString.’ (e.g., ‘DTE Loopback

test started on Sync Data Port

S01P1.’)

enterpriseTest-

Stop(105)

For virtual circuits (DLCIs):

H devFrExtDlciIfIndex

(devFrExt.mib)

H devFrExtDlciDlci

(devFrExt.mib)

H devLastTrapString

(devHealthAndStatus.-

mib

All tests have been halted on an

interface or virtual circuit.

String:

‘$testString test stopped on

$ifString.’ (e.g., ‘Disruptive PVC

Loopback test stopped on

DLCI 100 of Sync Data Port

S01P1 frame relay.’)

previous next