Filter
Top Products
Troubleshooting
6-18
9124-A2-LB20-00
March 2000
Aborting All Tests
Use the Abort All Tests selection from the Test menu to abort all tests running on
all interfaces, with exception to DTE-initiated loopbacks. To abort individual tests
that are active, see Starting and Stopping a Test.
" Procedure
To abort all tests on all interfaces:
1. Follow this menu selection sequence:
Main Menu →Test
2. Select Abort All Tests and press Enter.
Command Complete appears when all tests on all interfaces have been
stopped.
NOTE:
Abort All Tests does not interrupt DTE-initiated loopbacks.