Filter
Top Products
66 IBM Tivoli Remote Control Across Firewalls
Comments:
1. This port could be fixed in the rc_def_ports RC Policy.
2. This default port could be changed using the proxy-port parameter in the
[rcproxy] section of the Parent rcproxy.cfg file, in this case the RC Target
Proxy configuration file. This port must be the same as defined in the
rc_def_proxy RC Policy.
3. This port or port range could be fixed by configuring the local-port-range
parameter in the [children-cm-info] section of the Parent rcproxy.cfg file,
in this case the RC Target Proxy configuration file.
4. This port must be configured using the parent-local-port parameter in the
[communication-layer] section of the Relay Relay.cfg file. This port must be
the same as specified in the children-remote-list parameter in the
[communication-layer] section of the Parent rcproxy.cfg file, in this case
the RC Target Proxy configuration file.
5. The default polling interval could be changed by configuring the
polling-interval parameter in the [children-cm-info] section of the
Parent rcproxy.cfg file, in this case the RC Target Proxy configuration file, as
it is the initiator.
6. This port or port range could be fixed by configuring the local-port-range
parameter in the [children-cm-info] section of the Relay Relay.cfg file.
7. This port must be configured in the parent-local-port parameter in the
[communication-layer] section of the Child rcproxy.cfg file, in this case the
RC Controller Proxy configuration file. This port must be the same as
specified in the children-remote-list parameter in the
[communication-layer] section of the Parent rcproxy.cfg file, in this case
the RC Target Proxy configuration file.
Relay
(Relay)
random or
defined
6
(single or
range)
Controller
Proxy
(rcproxy)
defined
7
(single)
TCP Started at service time.
Communication between
two network zones.
Firewall rule needed.
Default polling interval is 2
seconds
8
.
Controller
Proxy
(rcproxy)
random
(single or
range)
Target
(eqnrcmai)
2501
9
(single)
TCP Started at request.
Communication in the
same network zone.
No firewall rule needed.
Source Destination Protocol Description
Type
(Service)
Port
(Single /
Range)
Type
(Service)
Port
(Single /
Range)