IBM 3.8 Garage Door Opener User Manual


 
Chapter 1. Remote Control sessions overview 39
# the machine where the target
# proxy runs.
#
# <rc proxy ip address>
# Identifies the machine where the target proxy
# runs. You must use this parameter only with
# the manual configuration type.
#
# <rc proxy port>
# Identifies the port that the target proxy uses to
# communicate with the controller or the controller
# proxy.
#
# Default value: NO
#
#
# Examples follow.
#
# First example:
# YES manual 192.168.100.50 3501
#
# Second example:
# YES auto 3501
#
# Third example:
# NO
#
echo "YES manual 9.3.4.169 8888"
exit 0
Data flow for an RC Proxy Standalone/multi-TMR session
Figure 1-7 shows in detail how a Remote Control session works using a Remote
Control Proxy Standalone architecture in a multi-TMR environment with firewall
restrictions.